Size Selection:
- A cell (244 mm x 203 mm) is applicable for more severe conditions
- B cell (488 mm x 406 mm) is applicable for mild conditions.
Section Sizes:
- Collapsed (before infill): 3.36 m x 50 mm to 200 mm
- Expanded: Section Width: 2.44 m
- Section Length: 6.1 m to 12.2 m
| GEOCELL (Textured and Smooth) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT | 50A | 75A | 100A | 150A | 200A | 50B | 75B | 100B | 150B | 200B |
| Sheet Length (m) | 3.36 | |||||||||
| Bonded Ranges (mm) | 330 +/- 2.5 | 660 +/- 2.5 | ||||||||
| Cell depth (mm) | 50 | 75 | 100 | 150 | 200 | 50 | 75 | 100 | 150 | 200 |
| Extended cell size (mm) | 244(W) x 203(L) | 488(W) x 406(L) | ||||||||
| Cells per section | 300 | 150 | ||||||||
| Expanded section size (m) | 2.44(W) x 6.1(L) | 2.44(W) x 12.2(L) | ||||||||
| Expanded section area (m2) | 15 +/- 1 | 30 +/- 1 | ||||||||
| Section weight Textured (kg) | 15 | 23 | 30 | 45 | 50 | 15 | 23 | 30 | 45 | 60 |
| Section weight Smooth (kg) | 12 | 18 | 24 | 36 | 48 | 12 | 18 | 24 | 36 | 48 |
| GEOCELL | ||
|---|---|---|
| MATERIAL SEAM PROPERTIES | Test Method | Value |
| Material | High Density Polyethylene | |
| Standard colour | black | |
| Sheet thickness (mm) Textured | ASTM D5199 | 1.5 +/- 15% |
| Sheet thickness (mm) Smooth | ASTM D5199 | 1.2 +/- 10% / -5% |
| Density (g/cm) | ASTM D792 | > 0.94 |
| Carbon black content (%) | ASTM D1603 | > 2 |
| Oxidative induction time (min) | ASTM D3895 | > 100 |
| Low Temp brittleness (C) | ASTM D746 | < 77 |
| Environment stress crack resistance (h) | ASTM D1693 | > 4000 |
| Seam Peel strangth (N/100 mm depth cell) | COE GL-86-19 | < 1000 |
| Seam hang strength (days) | HKCTM | Per 100mm seam shall sustain 72.5kg weight for at least 7 days, undergoing the variances from room temp to 53C on one hour cycle. |
The data in all tables is intended as guides only and is not intended as a warranty or guarantee. Permathene Ltd. reserves the right to change the specification contained herein without notice.