TECHNICAL

Back

Size Selection:

  • A cell (244 mm x 203 mm) is applicable for more severe conditions
  • B cell (488 mm x 406 mm) is applicable for mild conditions.

Geocell Cell Sizes

Section Sizes:

  • Collapsed (before infill): 3.36 m x 50 mm to 200 mm
  • Expanded: Section Width: 2.44 m
  • Section Length: 6.1 m to 12.2 m
GEOCELL SIZES BY GRADE
GEOCELL (Textured and Smooth)
PRODUCT 50A 75A 100A 150A 200A 50B 75B 100B 150B 200B
Sheet Length (m) 3.36
Bonded Ranges (mm) 330 +/- 2.5 660 +/- 2.5
Cell depth (mm) 50 75 100 150 200 50 75 100 150 200
Extended cell size (mm) 244(W) x 203(L) 488(W) x 406(L)
Cells per section 300 150
Expanded section size (m) 2.44(W) x 6.1(L) 2.44(W) x 12.2(L)
Expanded section area (m2) 15 +/- 1 30 +/- 1
Section weight Textured (kg) 15 23 30 45 50 15 23 30 45 60
Section weight Smooth (kg) 12 18 24 36 48 12 18 24 36 48
PHYSICAL PROPERTIES - GEOCELL
GEOCELL
MATERIAL SEAM PROPERTIES Test Method Value
Material   High Density Polyethylene
Standard colour   black
Sheet thickness (mm) Textured ASTM D5199 1.5 +/- 15%
Sheet thickness (mm) Smooth ASTM D5199 1.2 +/- 10% / -5%
Density (g/cm) ASTM D792 > 0.94
Carbon black content (%) ASTM D1603 > 2
Oxidative induction time (min) ASTM D3895 > 100
Low Temp brittleness (C) ASTM D746 < 77
Environment stress crack resistance (h) ASTM D1693 > 4000
Seam Peel strangth (N/100 mm depth cell) COE GL-86-19 < 1000
Seam hang strength (days) HKCTM Per 100mm seam shall sustain 72.5kg weight for at least 7 days, undergoing the variances from room temp to 53C on one hour cycle.
The data in all tables is intended as guides only and is not intended as a warranty or guarantee. Permathene Ltd. reserves the right to change the specification contained herein without notice.