TECHNICAL

Back

PHYSICAL PROPERTIES - ARMATEX M
Armatex M: woven geogrid for soft soil reinforcing (woven grid made from high tenacity PVA yarns with pvc coating)
Technical Method Units 20/20 35/20 40/40 55/30 65/65 80/30 80/80 110/30
Tensile strength EN ISO 10319 MD min. kN/m 25 40 45 60 75 90 90 130
CD min. kN/m 25 25 45 35 75 35 90 35
tolerances MD, CD -5 -5 -5 -5 -10 -10, -5 -10 -20, -5
Strain at maximum load EN ISO 10319 MD % 5 6 5 5 5 6 5 6
CD % 6 6 6 6 6 6 6 6
tolerances MD, CD +/-1 +/-2 +/-1 +/-2 +/-1 +/-2 +/-1 +/-2
Technical Method Units 150/30 150/150 200/20 200/50 200/100 250/125    
Tensile strength EN ISO 10319 MD min. kN/m 170 170 220 220 220 270    
CD min. kN/m 35 170 25 55 110 140    
tolerances MD, CD -20 -20 -20, -5 -20, -5 -20, -10 -20, -15    
Strain at max. load EN ISO 10319 MD % 6 6 6 5 6 6    
CD % 6 6 6 6 6 6    
tolerances MD, CD +/-2 +/-1 +/-2 +/-1 +/-2 +/-2    
Roll size   m 5 x 100
Mesh size ISO 4648 mm 20 x 20 or 35 x 35
PHYSICAL PROPERTIES - ARMATEX G
Armatex G: woven geogrid for soft soil reinforcing (woven grid made from high tenacity PET yarns with pvc coating)
Technical Method Units 20/20 35/20 35/35 40/40 55/30 55/55 65/20 65/30
Tensile strength EN ISO 10319 MD min. kN/m 25 40 40 45 60 60 70 70
CD min. kN/m 25 25 40 45 35 60 25 35
tolerances MD, CD -5 -5 -5 -5 -5 -5 -5 -5
Strain at max. load EN ISO 10319 MD % 12.5 12.5 12.5 12.5 13 13 13 13
CD % 12.5 12.5 12.5 12.5 13 13 13 13
tolerances MD, CD +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-2.5
Technical Method Units 65/65 80/30 80/80 110/30 110/110 150/30 150/50 150/150
Tensile strength EN ISO 10319 MD min. kN/m 75 90 90 130 130 170 170 170
CD min. kN/m 75 35 90 35 130 35 55 170
tolerances MD, CD -10 -10, -5 -10 -20, -5 -20 -20, -5 -20, -5 -20
Strain at max. load EN ISO 10319 MD % 12.5 12.5 13 13 13 13 12.5 14
CD % 12.5 12.5 13 13 13 13 12.5 14
tolerances MD, CD +/-2.5 +/-3.5 +/-2.5 +/-2.5 +/-2.5 +/-2.5 +/-3 +/-3
Technical Method Units 200/50A 200/50 300/50          
Tensile strength EN ISO 10319 MD min. kN/m 200 220 330          
CD min. kN/m 55 55 55          
tolerances MD, CD -50, -5 -20, -5 -30, -5          
Strain at max. load EN ISO 10319 MD % 12 18 14          
CD % 12 13 13          
tolerances MD, CD +/-3 +/-3, +/-2.5 +/-3, +/-2.5          
Roll Size m   5 x 100
Mesh Size ISO 4648 mm x mm 20 x 20 or 35 x 35

The data in all tables is intended as guides only and is not intended as a warranty or guarantee. Permathene Ltd. reserves the right to change the specification contained herein without notice.